Sign In | Sign Up to Shop/Forum

Steaming Wood

A place to discuss tenkara nets. Techniques for making it, woods used, designs, etc.

Steaming Wood

Postby Scott Anglin » Tue Jan 07, 2014 8:40 pm

This might be a dumb question, but is there any reason you need to steam bend the wood if you are happy with the shape of the hoop of the net?

I am currently air drying the net. It will be several months before it fully dries out and hardens. I still have to cut and connect the two branches. All I have done so far is cut, peel the bark, shape the hoop, and tie the hoop into shape.
Scott Anglin
 
Posts: 13
Joined: Sat Nov 30, 2013 11:33 pm

Re: Steaming Wood

Postby tsegelke » Wed Jan 08, 2014 7:05 am

The only reason to steam wood is for the bending process. It is usually done when the wood is already cured/dried. One would steam fresh or green wood, if they are doing some radical bending. Tenkara nets are often shaped very quickly after the branch is cut. Therefore the moisture is still in the wood (considered green), and does not need to be steamed for shaping.
tsegelke
 
Posts: 723
Joined: Tue Apr 10, 2012 8:29 pm


Return to Tenkara Nets

Who is online

Users browsing this forum: No registered users and 1 guest